Group 22 Rotary Actuators

General Specifications

 

Download a PDF copy of the Group 22 General Specifications »

 

Output Torque and Timing

Model # Torque in lb-ft (N•m) Stroke Time (sec./100°)
configurable
Approximate Weight in lbs (kgs)*

22-309

3,000 (4,067)

30-300

515(234)

22-409

2,000 (2,712)

7.5-150

515(234)

22-409

2,500 (3,390)

10-200

512(234)

22-409

4,000 (5,423)

15-300

512(234)

22-809

8,000 (10,846)

15-300

1,100(567)

* Standard configuration weights shown, the actual weight may vary depending on the selected options.

 

 

Drive Current Rating in Amps (listed by operating voltage)**

Model # Operating Voltage (Volts AC)
1- PHASE
3-PHASE
120 240 208 240 380 416 480 575
22-309
6.0
3.0
3.5
3.0
1.9
1.7
1.5
1.3
22-409

N/A

N/A
4.0
3.5
2.2
2.0
1.7
1.4
22-809
N/A
N/A
6.9
6.0
3.8
3.5
3.0
2.5

** Operating voltage tolerance is +10% to -15% and all drive models listed may be operated with a 60 Hz or 50 Hz frequency.

 

The gray shaded areas indicate the current rating for the standard operating voltage configuration. Non-standard operating voltages for model 22-309 and 22-409 are available with an optional transformer.

 

 

Additional Specifications

   
Operating Conditions –40° to 85° C. (–40° to 185° F.) 0 to 99% relative humidiy.
Demand Input Signal Range 4–20 mA, 1–5 V dc
Minimum Step 0.1° typical
Linearity ±1% of span, max. independent error
Hysteresis 0.25% of span at any point
Demand Input Signal Characterization Linear: Drive output shaft moves proportionally to the input signal.
Square: Drive output shaft moves proportionally to the square of the input signal.
Position Feedback Signal Demand input and position Feedback signals are isolated from ground and the ac power line. Signal buffering provides 24 Vdc isolation between the Demand and Feedback signals.
Overtorque Protection If the output torque of the drive exceeds 115% of the drive rating, the motor will shut off (feature can be enabled/disabled)
Action on Loss of Input Signal (Power On) Stays in place or runs to any preset position (configurable)
Stall Protection If the motor tries to run in one direction for more than 300 seconds (configurable from 30 to 300 seconds), the motor will shut off
Over-travel Protection Switches Two SPDT, one for CW and one for CCW limit of output shaft travel. Standard switch setting allows for 100° of travel.
Non-dedicated Switches (Field Adjustable) Two SPDT, rated for 1 A, 250 Vac
Handswitch Permits local electrical operation, independent of demand input signal
Handwheel (and Handcrank on the model 22-809) Provides manual operation without electrical power
Enclosure Precision-machined aluminum alloy castings, painted with corrosion-resistant polyurethane paint, provide a rugged, dust-tight, weatherproof enclosure.
Mounting Orientation Upright, as depicted in outline dimension drawings
Customer Wiring Terminals accommodate up to 12 AWG (3.31 mm2)
Motor Does not coast or overshoot and will not overheat, even under continuous modulation
Gear Train High efficiency, precision-cut, heat-treated alloy steel and ductile iron spur gears enclosed in and permanently lubricated by a grease-filled housing are designed for long life and minimal wear.
Mechanical Stops Prevent over-travel during automatic ormanual operation
Standards*** cULus Listed. CE Compliant.

*** NOTE: May not be available with all options and models. For more information or to inquire about standards not specifically listed, please call
     Beck at 215-968-4600.

 

Beck Videos

Get to Know Us

ACE 14

Beck Actuators Overview

Group 75 Actuators

Link-Assist Instructions

Actuators & Damper Drives

Beck Valve Actuators

Beck News

Foundation Fieldbus

Foundation Fieldbus

Beck is pleased to announce the successful completion of Foundation Fieldbus Interoperability testing of the Digital Control Module (DCM). As a resu... Read more...

Beck Actuators Qualify for the ARRA

Beck Actuators Qualify for the ARRA

All Beck Electric actuators and damper drives for industrial process control valves and dampers qualify for the American Recovery and Reinvestment ... Read more...

Drop-in Replacement for 3-Phase Actuators

Drop-in Replacement for 3-Phase Actuators

Group 11 control valve actuators and damper drives are now offered with an integral transformer for 208, 380, 415, 480, or 575 VAC power.

B... Read more...

DCM-2 (Digital Control Module)

DCM-2 (Digital Control Module)

The DCM-2 is Beck’s second generation Digital Control Module. As with the original DCM, it provides onboard, precision, modulating control of ... Read more...

Beck Enters Nuclear Industry Alliance With AZZ

Beck Enters Nuclear Industry Alliance With AZZ

Harold Beck and Sons Inc is pleased to announce its alliance with AZZ | NLI. This agreement makes Beck electric actuators available to all areas of n... Read more...

Group 75 Compact Rotary Actuators

Group 75 Compact Rotary Actuators

Beck’s new compact rotary actuator is an evolutionary design that combines the performance, reliability and control advantages of Beck actuators wit... Read more...

Ethanol Blending Optimization

Ethanol Blending Optimization

The ethanol blending process is a critical part of petrol terminal operation and has a significant impact on product quality, meeting environmental re... Read more...

Unique Actuator and Fulcrum Lever Design

Unique Actuator and Fulcrum Lever Design

Extracting oil from the Canadian oil sands is a challenge. This is especially true in areas where the oil sand is layered underground preventing the u... Read more...

Beck Plant Expansion

Beck Plant Expansion

July 2012

Harold Beck & Sons Inc., manufacturer of Beck electric actuators for industrial control valves and dampers, recently completed a... Read more...

Ethanol Producer Magazine

Ethanol Producer Magazine

Using electric actuators on critical applications improves control and reliability. A quality feed coproduct is vital to the success of an ethanol pla... Read more...

Power Insider Magazine

Power Insider Magazine

Actuator Performance Significantly Impacts Boiler Control & Plant Performance.

Harold Beck & Sons, Incorporated has been manufacturing elec... Read more...

Profibus PA

Profibus PA

Beck is pleased to announce the certification of its Profibus PA Digital Control Module (DCM), and associated EDD and GSD files. The most popular fie... Read more...

Beck Receives Supplier Award from B&W

Beck Receives Supplier Award from B&W

The B&W Power Generation Group has again presented Harold Beck and Sons, Incorporate... Read more...

Serial number Lookup

 

Catalog

Beck actuators are uniquely designed to deliver continuous and precise control.

Download Catalog