What is an Actuator?

An actuator is a device that uses a form of power to convert a control signal into mechanical motion. From electric door locks in automobiles, to ailerons on aircraft, actuators are all around us. Industrial plants use actuators to operate valves, dampers, fluid couplings, and other devices used in industrial process control. The industrial actuator can use air, hydraulic fluid, or electricity for motive power. These are referred to as pneumatic, electro-hydraulic, or electric actuators.

 

Pneumatic actuators can utilize a cylinder, diaphragm, or rotary vane design. Compressed air acts upon a piston or paddle to move it in one direction. A counterforce, consisting of a spring or a second volume of compressed air, is applied to the opposite side of the piston or paddle to reverse or maintain position. For industrial control, a pneumatic actuator requires positioning electronics, and an instrument air system. Of the three types of actuators, pneumatics tend to have the lowest initial price. However, operating costs are high due to the need to generate clean, dry, compressed air. Maintenance requirements are also the highest of the three actuator types.

 

Electro-hydraulic actuators operate a piston with pressurized oil. A motorized pump sends fluid from a reservoir through a control valve(s) to opposite sides of a cylinder. The high power density of this system allows for high thrust, and fast operating speeds. Electro-hydraulics tend to have a high initial price. Routine maintenance involves periodic replacement of seals, o-rings, etc. Since the oil used in hydraulic equipment can pose a fire hazard, this type of actuator may not be suitable for some industrial environments.

 

Electric actuators utilize an electric motor and gear reduction to produce a force or torque. A variety of technologies can be used for an electric actuator design. Motors may use AC or DC power, and an asynchronous (squirrel cage) or synchronous design. Gearing systems can include worm, spur, scotch yoke, among others. Gear lubrication may consist of an oil filled gear box, or heavy duty grease applied to the gear surfaces. Various accessories are often available to supervise and report on the actuator’s status and operating conditions. There is a wide variety of electric actuators on the market with different technologies, prices, performance, and quality.

 

Because actuators are closely integrated with driven elements like valves, and dampers, they are often referred to as assemblies. Examples include motor operated valves (MOV), air operated valves (AOV), and damper drives. Frequently, the actuator may be assumed to come with the equipment package. Examples include control valve, or air damper. In practice, actuators are the critical link between the control system and the final element. Its performance can significantly impact many aspects of an industrial plant’s operations and products. Care should be taken to ensure the correct actuator technology and type is selected.

 

When selecting an actuator, the actuator should have performance characteristics that will enable a control system to perform as designed.

 

The key actuator performance characteristics are as follows:

 

  • Precise, repeatable positioning typically better than 0.15% of span.
  • The ability to start and stop instantaneously without dead time or position overshoot.
  • Continuous duty rating without limitations on the number of starts per minute.
  • Perform consistently and unaffected by load.
  • Rugged industrial design capable of operating in difficult environments without an effect on performance.
  • Minimal periodic maintenance required.

 

An actuator designed with these characteristics provides two extremely important advantages:

  1. An ability to follow the demand signal from the controller precisely and instantly. This ensures that the actuator responds exactly as directed by the controller. Thus, the actuator is not the limiting factor in the control loop and the controller can function to its optimal levels.
  2. A high degree of maintenance-free reliability. An actuator designed to function as outlined above by default is more rugged than typical actuators. By design, then, it is capable of a much higher degree of reliability.

Beck electric actuators provide the necessary control and reliability that is required for many damper applications. The Group 11 actuator product line is often found on low to medium torque applications (20 lb-ft to 5,200 lb-ft). Group 22 actuators are utilized for high torque applications (3,000 lb-ft to 8,000 lb-ft), and Group 31 compact rotary actuators are utilized on low torque applications (15 lb-ft to 30 lb-ft).

 

Beck Videos

Get to Know Us

ACE 14

Beck Actuators Overview

Group 75 Actuators

Link-Assist Instructions

Actuators & Damper Drives

Beck Valve Actuators

Beck News

Ethanol Producer Magazine

Ethanol Producer Magazine

Using electric actuators on critical applications improves control and reliability. A quality feed coproduct is vital to the success of an ethanol pla... Read more...

Power Insider Magazine

Power Insider Magazine

Actuator Performance Significantly Impacts Boiler Control & Plant Performance.

Harold Beck & Sons, Incorporated has been manufacturing elec... Read more...

Profibus PA

Profibus PA

Beck is pleased to announce the certification of its Profibus PA Digital Control Module (DCM), and associated EDD and GSD files. The most popular fie... Read more...

Beck Receives Supplier Award from B&W

Beck Receives Supplier Award from B&W

The B&W Power Generation Group has again presented Harold Beck and Sons, Incorporate... Read more...

Foundation Fieldbus

Foundation Fieldbus

Beck is pleased to announce the successful completion of Foundation Fieldbus Interoperability testing of the Digital Control Module (DCM). As a resu... Read more...

Beck Actuators Qualify for the ARRA

Beck Actuators Qualify for the ARRA

All Beck Electric actuators and damper drives for industrial process control valves and dampers qualify for the American Recovery and Reinvestment ... Read more...

Drop-in Replacement for 3-Phase Actuators

Drop-in Replacement for 3-Phase Actuators

Group 11 control valve actuators and damper drives are now offered with an integral transformer for 208, 380, 415, 480, or 575 VAC power.

B... Read more...

DCM-2 (Digital Control Module)

DCM-2 (Digital Control Module)

The DCM-2 is Beck’s second generation Digital Control Module. As with the original DCM, it provides onboard, precision, modulating control of ... Read more...

Beck Enters Nuclear Industry Alliance With AZZ

Beck Enters Nuclear Industry Alliance With AZZ

Harold Beck and Sons Inc is pleased to announce its alliance with AZZ | NLI. This agreement makes Beck electric actuators available to all areas of n... Read more...

Group 75 Compact Rotary Actuators

Group 75 Compact Rotary Actuators

Beck’s new compact rotary actuator is an evolutionary design that combines the performance, reliability and control advantages of Beck actuators wit... Read more...

Ethanol Blending Optimization

Ethanol Blending Optimization

The ethanol blending process is a critical part of petrol terminal operation and has a significant impact on product quality, meeting environmental re... Read more...

Unique Actuator and Fulcrum Lever Design

Unique Actuator and Fulcrum Lever Design

Extracting oil from the Canadian oil sands is a challenge. This is especially true in areas where the oil sand is layered underground preventing the u... Read more...

Beck Plant Expansion

Beck Plant Expansion

July 2012

Harold Beck & Sons Inc., manufacturer of Beck electric actuators for industrial control valves and dampers, recently completed a... Read more...

Serial number Lookup

 

Catalog

Beck actuators are uniquely designed to deliver continuous and precise control.

Download Catalog